How to Use Your LED Light Therapy Device
To get you started let's check that you have the below items:
> LED Hair Growth Helmet
> Charging cable
> Carry bag
> Trudermal Cap
How To Use Guide
Ensure your hair is clean and completely
dry before each session.
Do not apply any products to the scalp or hair prior to using the device.
Step 1: Fully Charge the battery. Place the device inside the hat with the controller at the back.
Step 2: Place the battery on the back of the hat where the three magnetic dots are. The battery should easily click into place.
Step 3: Press and hold the controller button until the device turns on.
Step 4: The device will automatically shut off after the 10 minute session. Finish with Regen Serum for best results.
* We always recommend checking the contraindications and performing a sensitivity test 24hrs prior to your first treatment. Please refer to your user manual.
How to charge your Halo
This device uses a Lithium ion polymer battery. When in charging mode the LED will not illuminate.
Before use it is important to fully charge your LED hair systems battery/controller.
To charge your controller, insert the USB-C cable into the controller and insert the USB connector into adapter provided.
While charging, the indicator will flash green and turn solid when fully charged.
Troubleshooting
Need help? It's normally quick and easy to solve.
LED mask not turning on.
> Make sure your LED mask is fully charged.
> Press and hold down the controller button for a few seconds until the LEDs illuminate.
> Ensure the USB-C and USB ends of the charging cable are connected properly.
> Use an alternative outlet to help identify and check any charging problems.
LED Mask is turning off after 30 seconds.
The controller battery charge may be low and we recommend charging the controller fully and try again.
For anything else.
DO NOT attempt to investigate or modify the device in any way. The device has NO parts you can repair yourself.
Please contact Trudermal customer service at team@trudermal.com.au for further assistance.
Care & Maintenance
Clean your LED device after each treatment with a water based wipe or damp clean cloth.
Store your LED mask at room temperature in dry condition using the carry bag provided.
Avoid storing the device in dusty condition, direct sunlight or in damp and humid conditions.
